RAP Capabilities & Cost for BMW
Disclaimer: When using RAP®, completely disconnect any aftermarket accessories including radios, alarms, sound systems, starters, etc. from the vehicle communication bus; failure to do so may cause programming failures and void our service guarantee. Please note that this program does not support programming used or salvage modules. Be sure to plug in RAP kit and turn on tablet 30 minutes prior to RAP session to ensure any available software updates are completed.
Effective April 1, 2019
- Some vehicles will need to be scanned using the OEM software to determine whether an update is available or not. This process may take 15–20 minutes prior to the programming service.
- Some vehicles may take up to 4 hours to complete programming.
- J2534 module programming, updating, coding: $125.00 each.
- Module calibration check: $40.00 each.
| Year | Model | Capabilities |
|---|---|---|
| 2002 and newer | All | Emission module (ECM/TCM/PCM) updating & replacement |
| 2002 and newer | All* | All Body and Chassis module updating & replacement |
* Few exceptions below
| Year | Model | Exceptions |
|---|---|---|
| 2018 – 2019 | F39 | No module programming or coding. |
| 2019 | G05, G07, G14, G15, G20 | No module programming or coding. |
| All | All | All Infotainment ECUs (SAT NAV / RADIO / AMPLIFIER / CD / DVD) Coding Only (Replacement Needs Coding). Module updating not possible. Replacement possible with stipulations. NOTE: After a hard drive-based head unit (CIC, NBT, etc.) replacement, an enabling code for the navigation system is needed along with the navigation software and we cannot provide it. DVD-Based Head units (CCC) need a voice-enabling code imported after replacement of the head unit, we cannot provide it.
|
| All | All | All Bluetooth / Telephone ECUs. Coding Only (Replacement Needs Coding. No module updating.) |
| (E Chassis) | All | CAS (Car Access System) Coding Only (Replacement Needs Coding). No module updating. |
| (E Chassis) | All | JBE (Junction Box Electronics) Coding Only (Replacement Needs Coding. No module updating. |
| (E Chassis) | All | FRM (Footwell Module) Coding Only (Replacement Needs Coding). No updating. |
| (E Chassis) | All | Engine ECUs (MEV1722/MEVD1726). Updating only. No replacements |
| (E Chassis) | E46, E83 | MS45.1 Replacements only. No updating (Replacement needs programming). NOTE: EGS and DSC should be disconnected before programming is performed.
|
| (E Chassis) | E6x Non-Motorsport Cars | Sequential Manual Gearbox Module. No module updating. No Module Coding. No replacements. |
| (E Chassis) | E83, E85, E86, E9x | MSV80 DME (Digital Motor Electronics) No updating. No replacements (Replacement needs programming). |
| (F Series) | All | Instrument Cluster Coding only Only (Replacement Needs Coding). No updating. |
| (F/G Chassis) | All | FEM (Front Electronic Module) No existing module updates. Updating of replacement module as long as existing module is able to communicate. |
| (F/G Chassis) | All | BDC (Body Domain Controller) Existing module updating only. No module replacements. |
| (F/G Chassis) | All | Instrument Cluster. Coding Only. No module updating or replacement. |
| All | All Hybrid or Electric | No support. |
For more information about RAP, call us toll-free at 844.REFLASH (844.733.5274).
Office hours are 8:30am – 6:30pm EST Monday – Friday.